manualshive.com logo in svg

Cisco ASR 903, Release Notes, Page: 95 / 280

Share
Download
Cisco ASR 903 Release Notes Download Page 95

 

13

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-08

Chapter

  Caveats in Cisco IOS XE 3.7S Releases

•

CSCug21145

Symptom:

 When system crashes, sometimes core files are generated with CRC errors.

Conditions:

 This issue occurs when the system crashes under stress conditions.

Workaround: 

There is no workaround. 

•

CSCug22122

Symptom:

 IOMD crash is seen for any IM on the router.

Conditions:

 The IOMD crash is seen when show platform software agent IOMD 0/1 driver stats 

command is executed to verify driver statistics.

Workaround:

 There is no workaround. 

•

CSCug23372

Symptom:

 Manager process crash occurs while configuration replace operation is performed.

Conditions:

 This issue occurs while moving from REP to G8032.

Workaround:

 Avoid performing a configuration replace.

•

CSCug26432

 

Symptom:

 Egress layer3 multicast drops to few BDI outgoing interfaces after a router reload.

 

Conditions:

 This issue occurs after router reload.

Workaround:

 There is no workaround.

•

CSCug31414

Symptom:

 Multicast traffic drops on changing interface configuration from TEFP to VPLS over 

port channel (PoCH).

Conditions:

 This issue occurs when converting a layer 2 interface to layer 3; and then configuring 

IP PIM and IP address in quick succession.

Workaround:

 Use 

shutdown

 and 

no shutdown

 command on the interface. 

•

CSCug39899

Symptom:

 Traffic stops flowing through QinQ BDI interface after ARP times out and ARP is 

removed by shutting the BDI.

Conditions:

 This issue occurs when static routing is configured, and no routing protocol is 

configured on the interface.

Workaround:

 Manually resolve the ARP by pinging the BDI interface. 

•

CSCug46010

Symptom:

 The non IP packets get classified under the second class instead of class-default when 

two class-maps one having match on L4 ACL and other having match on L3 ACL with permit ip any 
any is configured.

Conditions:

 This issue occurs when two class-maps one matching on L3 ACL match and another 

matching on TCP or UDP are configured.

Workaround:

 There is no workaround.

•

CSCug52920

Symptom: 

EFP stats does not work after applying the QoS policy on the EFP.

Conditions: 

This issue occurs when service policy is applied on the EFP.

Workaround:

 There is no workaround. 

Summary of Contents for ASR 903

























































































































































































































































































Reviews:

No comments