
47
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Chapter
Caveats in Cisco IOS XE 3.7S Releases
–
The policy is attached to the main interface.
–
The policy classifies on multiple VLANs.
–
The classification statements specify a priority.
–
The classification statements are within a child QoS policy.
Workaround:
There is no workaround.
•
CSCua96186
Symptom:
The router drops cells on a CE-to-CE connection.
Conditions:
Occurs with ATM VCC and VPC cell relay mode with 64-byte traffic. The issue occurs
between the ASR 903 and ASR 901 routers.
Workaround:
There is no workaround.
•
CSCub04699
Symptom:
The
bandwidth
and
bandwidth percent
commands do not function correctly.
Conditions:
Occurs when you configure a service-policy with the
priority
and
police
commands in
one class and the
bandwidth
or
bandwidth percent
commands in another class.
Workaround:
There is no workaround.
•
CSCub48081
Symptom:
The router does not learn remote MEPs on an EVC bridge-domain MEP following an
interface module reset (soft OIR). The router displays messages indicating object download failure;
the interface status of the xconnect MEP on the peer router displays as administratively down.
Conditions:
Occurs when you
–
Configure offloaded EVC xconnect MEP sessions and the sessions are active
–
Configure EVC bridge-domain MEPs
–
Perform a reset (soft OIR) of the Ethernet interface module
Workaround:
Remove and restore the local MEP configuration on both routers.
•
CSCub55760
Symptom:
The router displays a Delay Measurement Message (DMM) delay value of 0.
Conditions:
Occurs under the following conditions:
–
You configure an EVC down MEP on a port-channel interface.
–
You dynamically add a member link to a port-channel interface.
Workaround:
Configure PTP synchronization before scheduling DMM.
•
CSCub60668
Symptom:
The router is unable to establish an OSPF session.
Conditions:
Occurs when you enable an OSPF session over an MPLS TP tunnel.
Workaround:
There is no workaround.
•
CSCub69132
Symptom:
The OC-3 interface module crashes.
Conditions:
Occurs when you issue a soft reload on the OC-3 interface module when the
router is configured with MLPPP at a high scale.
Workaround:
There is no workaround.