56
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Caveats in Cisco IOS XE 3.9S Releases
•
CSCue57671
Symptoms:
Router Crashes while running with REP configurations
Conditions:
Crash seen while
removing REP configuration from interface.
Workaround:
None
•
CSCue59544
Symptoms:
Once path is once available for TE tunnel, it doesn’t comes up
Conditions:
If
A900-IMA16D is also present on router, it generates storm which prevent RSVP processing and TE
tunnel doesn’t up once TE path is available again
Workaround:
None
•
CSCue77612
Symptoms:
The mac sync can happen on wrong lportid in the standby which can cause traffic
forwarding to the wrong port after switchover.
Conditions:
The traffic impact will be seen only after the switchover.
Workaround:
clear mac-add after switchover.
•
CSCue86696
Symptoms:
Noticed interface flap on one of the routers, during overnight soak run.
Conditions:
Seen during prolonged soak tests with SFP IM.
Workaround:
None
•
CSCue87542
Symptoms:
On BDI delete, if routing traffic continues, it will be punted to the CPU which will flood
out the CPU resulting in control plane loss
Conditions:
Ping failure and BFD/OSPF flaps on BDI delete while ipv4/v6 traffic is running.
Workaround:
The workaround is to delete the TEFP and then delete the BDI interfaces.
•
CSCue89790
Symptoms:
IPv6 traffic outage after SSO when NSF timer expires.
Conditions:
Occurs when configuring IPv6 static routing or IPv6 OSPF routing.
Workaround:
For IPv6 SSO support, ensure the following:
–
IPv6 neighbor are configured statically.
–
For dynamic route or static route, you must run a hardware BFD between IPV6 neighbors.