manualshive.com logo in svg

Cisco ASR 903, Release Notes, Page: 35 / 280

Share
Download
Cisco ASR 903 Release Notes Download Page 35

C H A P T E R

 

1

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-08

5

New Features in Cisco IOS XE 3.9S Releases

This chapter provides information about the new features introduced in the Cisco IOS XE Release 3.9S 
and includes the following sections:

•

New Hardware Features in Cisco IOS XE Release 3.9(2)S, page 5-1

•

New Software Features in Cisco IOS XE Release 3.9(2)S, page 5-1

•

New Hardware Features in Cisco IOS XE Release 3.9(1a)S, page 5-1

•

New Software Features in Cisco IOS XE Release 3.9(1a)S, page 5-2

•

New Hardware Features in Cisco IOS XE Release 3.9(0)S, page 2

•

New Software Features in Cisco IOS XE Release 3.9(0)S, page 3

New Hardware Features in Cisco IOS XE Release 3.9(2)S

There are no new hardware features introduced in Cisco IOS XE Release 3.9(2)S.

New Software Features in Cisco IOS XE Release 3.9(2)S

There are no new software features introduced in Cisco IOS XE Release 3.9(2)S.

New Hardware Features in Cisco IOS XE Release 3.9(1a)S

Release 3.9(1) introduces support for the following hardware features:

•

GLC-FE-100EX

•

GLC-FE-100ZX

•

SFP-GE-L

•

SFP-GE-S

•

SFP-GE-Z

Summary of Contents for ASR 903

























































































































































































































































































Reviews:

No comments