manualshive.com logo in svg

Cisco ASR 903, Release Notes, Page: 27 / 280

Share
Download
Cisco ASR 903 Release Notes Download Page 27

 

5

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-08

Chapter

  New Software Features in Cisco IOS XE Release 3.7(0)S

–

http://www.cisco.com/en/US/docs/ios-xml/ios/qos_conmgt/configuration/xe-3s/asr903/qos-con
mgt-multilevel-pq.html

–

http://www.cisco.com/en/US/docs/ios-xml/ios/qos_conmgt/configuration/xe-3s/qos-conmgt-mul
tilevel-pq.html

•

N:1 PVC mapping to PWE with non-unique VPI—This feature allows you to map one or more ATM 
permanent virtual circuits (PVCs) to a single pseudowire. For more information, see 

http://www.cisco.com/en/US/docs/ios-xml/ios/atm/configuration/15-2s/atm-n1pvc-mapping.html

.

•

Onboard Failure Logging—The Onboard Failure Logging (OBFL) feature collects data such as 
operating temperatures, hardware uptime, interrupts, and other important events and messages from 
system hardware installed in a Cisco router or switch. The data is stored in nonvolatile memory and 
helps technical personnel diagnose hardware problems. For more information, see 

http://www.cisco.com/en/US/docs/wireless/asr_900/feature/guides/onboard_failure_logging.html.

•

PTP Redundancy—PTP redundancy allows a PTP slave clock to select the best master from multiple 
available master clocks based on clock quality and availability. For more information, see 

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/chassis/Release3.7.0S/ASR903-
Chassis-SW-37.html

.

•

Time of Day Selection—You can use the time of day (ToD) and 1PPS ports on the Cisco ASR 903 
Series Router to exchange ToD clocking. In master mode, the router can receive time of day (ToD) 
clocking from an external GPS unit; the router requires a ToD, 1PPS, and 10Mhz connection to the 
GPS unit. For more information, see 

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/chassis/Release3.7.0S/ASR903-
Chassis-SW-37.html

Summary of Contents for ASR 903

























































































































































































































































































Reviews:

No comments