
6
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Chapter
Caveats in Cisco IOS XE 3.7S Releases
Workaround:
Reduce the rate of traffic.
•
CSCua99096
Symptoms: The
show ima interface
command omits some IMA group information such as
ImaGroupSymmetry.
Conditions: This issue occurs when the
show ima interface
command.
Workaround: There is no workaround.
•
CSCub94462
Symptom:
The router displays object download error messages on the console.
Conditions:
This issue occurs under the following conditions
–
Execute the
mac address sticky
command.
–
Configure 25 incremental MAC addresses and execute the
clean mac-address-table bdomain
command
–
Remove a mac security sticky configuration from an EVC interface.
Workaround:
Avoid issuing the
clear mac-address-table
command when the
mac security sticky
command is applied.
•
CSCuc08397
Symptom:
When IFM is configured on EVC BD, with encapsulation default in the core, the remote
MEPS are not learnt.
Conditions:
This issue is seen when encapsulation default is configured on the core facing side.
Workaround:
There is no workaround.
•
CSCud09142
Symptom:
FP active error messages are seen when the tunnel-tp interface is removed in a
high-availability setup.
Conditions:
This issue is seen after removing tunnel-tp interface.
Workaround:
There is no workaround.
•
CSCud34600
Symptom:
Event hog messages are received when 21k to 25k routes are advertised into MBGP and
exported from one PE to another.
Conditions:
This issue occurs when the redistributing routes range from 21k to 25k routes from
OSFP are moved into MBGP and are exported from one PE to another.
Workaround:
There is no workaround.
•
CSCud90362
Symptom:
the SYNC packets go out quite irregularly when PTP master is configured.
Conditions:
This issue is seen when the router is configured as PTP master.
Workaround:
There is no workaround.
•
CSCue24854
Symptom:
Loss of 70 msec are observed when performing an IM OIR in a remote LFA ring.
Conditions:
This issue occurs when soft OIR is performed.
Workaround:
Do a hard OIR to get less than 50 msec loss.
•
CSCue73478