Cisco ASR 5000 Series, Installation Manual

Page: 49 / 317

ASR 5000 Hardware Platform Overview
Line Cards ▀
ASR 5000 Installation Guide ▄
49
Figure 19. Channelized Line Card (CLC2)
Table 21. CLC2 (Frame Relay) Callouts
Item Description
1 Card Ejector Levers —Use to insert/remove card to/from chassis.
2 Interlock Switch —In its Down position the interlock switch notifies the system to safely power down the card
prior to its removal.
3 Card Level Status LEDs —Show the status of the card.
4
Port connectors —Fiber LC duplex female connector.
5 Port Level Status LEDs —Show the status of a port.
6 Line Card Label — Identifies the type of SFP modules and cabling supported:

CLC2, OC-3/STM-1, Single Mode

CLC2, OC-3/STM-1, Multi-Mode
The Channelized Line Card (CLC2) was developed in compliance with the following standards:

ITU-T - Recommendation G.704 - Synchronous Frame Structures Used at 1544, 6312, 2048, 8448 and 44736
kbps Hierarchical Levels, October, 1998.

ITU-T - Recommendation G.706 - Frame Alignment and Cyclic Redundancy Check (CRC) Procedures Relating
to Basic Frame Structures Defined in Recommendation G.704, April 1991.

ITU-T - Recommendation G.707 Network Node Interface for the Synchronous Digital Hierarchy (SDH),
December 2003.

ITU-T - Recommendation G.747 Second Order Digital Multiplex Equipment Operating at 6312 kbps and
Multiplexing Three Tributaries at 2048 kbps, 1993.