Cisco ASR 5000 Series, Installation Manual

Page: 271 / 317

Technical Specifications
Interface Specifications ▀
ASR 5000 Installation Guide ▄
271
Fast Ethernet Line Card (FLC2) Interfaces
Each of the eight RJ-45 interfaces available on the FLC2 supports auto-sensing 10Base-Tx or 100Base-Tx Ethernet
interfaces.
10/100 Mbps RJ-45 Interface
The RJ-45 interfaces on the Fast Ethernet line card support the following cable types and transfer rates. The following
figure shows the pin-outs for the RJ-45 Ethernet ports.
Table 96. FLC2 RJ-45 Ethernet Pinouts
Pin 10Base-T 10Mbps Cat3 100Base-TX 100Mbps Cat5
1 TX+ TX+
2 TX- TX-
3 RX+ RX+
4 na na
5 na na
6 RX- RX-
7 na na
8 na na
Gigabit Ethernet Card (GLC2/QGLC) SFP Interfaces
1000Base-SX
The 1000Base-SX fiber SFP interface on the Gigabit Ethernet Card (GLC2) has one pair of fiber connectors. The Quad
Gigabit Ethernet Card (QGLC) has four pairs.
Table 97. 100Base-SX Fiber Transmit and Receive Levels
Signal Level
Max TX: 0 dBm
Min TX: -9.5 dBm
Max RX: 0 dBm (saturation average power)
Min RX: -20 (typical) / -17 (max.) dBm (sensitivity average power)