Cisco ASR 5000 Series, Installation Manual

Page: 266 / 317

Technical Specifications
▀ Interface Specifications
▄ ASR 5000 Installation Guide
266
Fiber SFP Interface
The fiber Small Form-factor Pluggable (SFP) interface has two host connectors that receive SFP transceivers.
Table 92. Fiber SFP Interface Transmit and Receive Levels
Signal Level
Max TX: 0 dBm
Min TX: -9.5 dBm
Max RX: 0 dBm (saturation average power)
Min RX: -20 (typical) / -17 (max.) dBm (sensitivity average power)
10/100/1000 Mbps RJ-45 Interface
The two RJ-45 interfaces are auto-sensing 10/100/1000 Ethernet (10Base-T/100Base-TX/1000Base-T) that require
unshielded twisted pair (UTP) copper cable. Refer to the following figure and table for pin-outs for the RJ-45 Ethernet
ports.
Table 93. SPIO RJ-45 Ethernet Interface Pinouts
Pin 10Base-T 10Mbps Cat3 100Base-Tx 100Mbps Cat5 1000Base-Tx 1Gbps Cat5+
1 TX+ TX+ BI DA+
2 TX- TX- BI DA-
3 RX+ RX+ BI DB+
4 Not used Not used BI DC+
5 Not used Not used BI DC-
6 RX- RX- BI DB-
7 Not used Not used BI DD+
8 Not used Not used BI DD-