manualshive.com logo in svg

Christie VeinViewer Flex, User Manual, Page: 63 / 76

Share
Download
Christie VeinViewer Flex User Manual Download Page 63

CHAPTER ELEVEN: TECHNICAL SPECIFICATIONS

57

VEINVIEWER FLEX USER GUIDE

020-300020-03  Rev. 1  (03-2013)

Guidance and manufacturer’s declaration - electromagnetic emissions

VeinViewer Flex is intended for use in the electromagnetic environment specified below. The customer or the user of VeinViewer Flex should ensure 
that it is used in such an environment.

Emission Test

Compliance

Electromagnetic Environment - guidance

RF emissions Cispr 11

Group 1

VeinViewer Flex uses RF energy only for its internal function. Therefore, its RF emissions are very 
low and are not likely to cause any interference in nearby electronic equipment. 

RF emissions Cispr 11

Class B

VeinViewer Flex is suitable for use in all establishments, including domestic establishments and 
those directly connected to the public low voltage power supply network that supplies buildings 
used for domestic purposes.

Harmonic Emissions 
IEC 61000-3-2

Class A

Voltage Fluctuation/flicker Emissions 
IEC 61000-3-3

Complies

Summary of Contents for VeinViewer Flex













































































Reviews:

No comments