Christie VeinViewer Flex, User Manual, Page: 53 / 76

CHAPTER TEN: TROUBLESHOOTING 47
VEINVIEWER FLEX USER GUIDE
020-300020-03 Rev. 1 (03-2013)
No visible change in the
image field or
functionality when a
feature button
is pressed Imaging mode icon in
image border Control Panel button not
properly pressed Firmly press and release alternate Control Panel buttons to verify Control Panel
functionality.
Note: Make sure, desired modes and features have been enabled using the
VeinViewer Flex Connect software.
See the "IMAGING MODES" section in
CHAPTER SIX: OPERATING INSTRUCTIONS for licensed imaging modes and
features.
Projected image appears
out of alignment Drop Event Indicator
in image border and
Status Indicator
illuminated solid
orange. See CHAPTER
SIX: OPERATING
INSTRUCTIONS VeinViewer Flex was accidently
dropped See "DROP EVENT" in this chapter.
Projected image is out of
focus Image border text
appears blurry VeinViewer Flex is not set to
optimal focusing distance See "FOCUSING PROCEDURE" in CHAPTER SIX: OPERATING
INSTRUCTIONS.
Projected image does not
properly display veins None VeinViewer Flex is being
operated outside or in direct
sunlight Do not use the VeinViewer Flex outside or in direct sunlight. See the
recommended operating conditions in CHAPTER ELEVEN: TECHNICAL
SPECIFICATIONS.
PROBLEM STATUS INDICATOR CAUSE SOLUTION