Christie VeinViewer Flex, User Manual

Page: 19 / 76

CHAPTER FOUR: VEINVIEWER FLEX SETUP 13
VEINVIEWER FLEX USER GUIDE
020-300020-03 Rev. 1 (03-2013)
CHAPTER FOUR: VEINVIEWER FLEX SETUP
CAUTION: Inspect all parts for possible shipping damage
before using. In case of damage, DO NOT use VeinViewer
Flex. Contact the Christie Technical Support department for
further instruction. Failure to do so may affect the safety and
effectiveness of VeinViewer Flex.
WARNING: Keep VeinViewer Flex dry. Do not store or
operate VeinViewer Flex and components outside the
recommended storage or operating temperature and humidity
range, or in dusty areas. Failure to do so could lead to
electrical shock, and/or result in reduction of the performance
of VeinViewer Flex.
There may be instances in which condensation may develop on the
inside of the projection window when the device is moved from areas
where extreme temperature and humidity changes are experienced.
Should this occur, please allow VeinViewer Flex to acclimate or until
condensation is no longer visible.
CHARGING THE BATTERY
The battery life is designed to provide about 300 full charge/discharge cycles. The
battery should be replaced after this period in order to maintain optimal
performance of VeinViewer Flex.
Optimum battery storage is achieved when the battery is stored at room
temperature. Exposure to high temperatures will prevent the battery from being
used or from being charged. It is recommended that the battery is recharged if it is
stored longer than 6 months.
WARNING: Failure to store and/or operate VeinViewer Flex
within the recommended operating temperature and humidity
parameters, could result in product deterioration, or lead to
electrical shock. See CHAPTER ELEVEN: TECHNICAL
SPECIFICATIONS for operating and storage specifications.
The Battery is not fully charged upon delivery of VeinViewer Flex. To
maintain optimal performance, the Battery should always be fully
charged prior to using VeinViewer Flex.