Christie VeinViewer Flex User Manual Download Page 11 | Manualshive

Page: 11 / 76

background image

CHAPTER TWO: WARNING AND SAFETY NOTICES

5

VEINVIEWER FLEX USER GUIDE

020-300020-03 Rev. 1 (03-2013)

GENERAL SAFETY AND WARNINGS

This safety section contains important information for the safe operation and use
of this product.

WARNING: DO NOT use this product or any available
optional equipment without first completely reading and
understanding the instructions outlined in this manual and any
additional instructional material such as service manuals or
instruction sheets supplied with this product or optional
equipment.

If you are unable to understand the warnings, cautions or
instructions within this manual, contact Christie Technical
Support before attempting to use this equipment. Failure to
do so could result in injury or damage.

WARNING: DO NOT make any modifications to this
equipment beyond the instructions provided in this manual or
instruction sheets supplied with this product or optional
equipment. Failure to do so, could result in injury or damage.

WARNING: VeinViewer Flex components are specifically
designed and manufactured for use in conjunction with
VeinViewer Flex. Components, parts and accessories designed
by other manufacturers have not been tested by Christie and
are not recommended for use with VeinViewer Flex. This
could result in an increase of electromagnetic emissions or
decrease in electromagnetic immunity, and/or affect the safety
and effectiveness of VeinViewer Flex. Use ONLY the
components listed in the VeinViewer Flex Parts List.

WARNING: DO NOT connect any other medical devices
directly to VeinViewer Flex. This could cause unexpected
failure of the device and VeinViewer Flex. VeinViewer Flex
should not be used adjacent to, or stacked with other
equipment not specified in this manual. If adjacent use is
necessary, VeinViewer Flex should be observed to verify
normal operation in the configuration in which it will be used,
prior to starting any type of medical procedure. Portable and
mobile RF communications equipment can affect VeinViewer
Flex. Refer to the Technical Specification included in this
manual. Failure to do so could result in injury or damage.

«
...
9
10
11
12
13
...
»

Summary of Contents for VeinViewer Flex













































































Reviews:

No comments

Related manuals for VeinViewer Flex

Brand: B&K Pages: 5

Brand: B&K Pages: 28

Brand: MADRIX Pages: 12

Brand: Narcotrend Pages: 47

Brand: KaVo Pages: 49

Brand: Easson Pages: 33

Brand: R&S Pages: 2677

Brand: Rane Pages: 6

Brand: Rane Pages: 27

Brand: Ranger Products Pages: 6

Brand: Rane Pages: 88

Brand: Haag-Streit Pages: 21

Brand: Tactile Medical Pages: 23

Brand: Taarup Pages: 72

Brand: UNI-T Pages: 4

UPO3000E Series

Brand: UNI-T Pages: 94

Brand: UMS Pages: 92

Brand: Waterpik Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands