Christie Roadie 25K, User Manual

Page: 33 / 191

INSTALLATION AND SETUP
Roadie 25K User’s Manual
2-27
Not possible. Composite and S-Video connect to
INPUT 3
and
INPUT 4
only.
Optional input modules allow you to increase your total number of inputs and/or
accommodate different signal types, whether analog or digital. Install in the areas
labeled
INPUT 6
or (if available)
INPUT 5.
These interfaces include:
•
RGB 500 Input Module
•
RGB 400 Active Loop Thru Input Module
•
RGB 400 Buffered Amplifier Input Module
•
Composite/S-Video Input Module
(note: not currently supported)
•
PC250 Analog Input Module
•
Serial Digital Input Module
•
Digital HDTV Module
(note: discontinued)
•
DVI Input Module
•
Dual SD/HD-SDI Module
(supplied as standard in this projector)
For even more sources, connect a 3
rd
-party switcher to the RS232 IN port, or, if
RS422-compatible, to any of the three RS422 ports.
NOTES:. 1) Connect analog HDTV signals directly to
INPUT 1
or to any other
“RBG” input module installed—the optional HDTV Input Module used in earlier
projectors is not needed or recommended. 2) See Appendix F, Optional Input
Modules for a brief description of each interface.
Extra Video
'
Optional Inputs
'