Christie CineIPM-2K, User Manual

Page: 96 / 122

SPECIFICATIONS
6-2 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
Analog: Video
(INPUTS 3 and 4)
Signal formats Composite (CVBS), S-Video (Y/C)
Connectors
• Composite Video
(INPUT 3)
• S-Video
(INPUT 4)
BNC
4-pin miniature DIN
Video standards NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, PAL-60 & SECAM
A/D conversion resolution 8-bit
Input levels
Composite
S-Video, Luma (Y)
S-Video, Chroma (C)
1.0 V
p-p
± 3dB
(including sync tip)
1.0 V
p-p
± 3dB
(including sync tip)
630 m V
p-p
nominal (burst)
DC offset ± 2V
Nominal impedance
75
Σ
Maximum return loss (VSWR) 1.2:1 dB @ 6 MHz
Analog: Sync
(INTERLACED OR PROGRESSIVE SCAN FORMAT
)
Input levels
(for composite or separate H & V)
0.5V
p-p
– 4.0V
p-p
Impedance
(for composite or separate H & V) 75
Σ
Sync type
(for composite or separate H & V)
•
Separate H and V
•
Bi-level or tri-level sync-on-green
•
Bi-level or tri-level composite
•
Serrations and/or Equalization pulses
•
MacroVision
™
for stnd. & prog. video
Polarity
(for composite or separate H & V)
Positive or negative
Maximum return loss (VSWR) 1.2:1 dB @ 200 MHz
DVI-I
(INPUT 2)
Interface standard DDWG DVI 1.0
Signal types / color spaces •
RGB (digital or analog)
•
YPbPr (analog)
•
YCbCr (digital)
not supported in v1.1
Horizontal Frequency Range 15 – 120 kHz
Vertical Frequency Range 23.97 – 150 kHz
Pixel clock rate 25 – 165 MHz
Analog sync input impedance
1 k
Σ
Maximum cable length 5 meters (16 ft.)
Supports EDID
Does not support HDCP. For all other DVI specifications, see Analog: RGB / YPbPr on previous page.
Wired Remote
(CONVERTED FROM IR REMOTE KEYPAD)
1 input (front) • 3.5mm phono jack
Input levels • High = 2.2 V – 5.6 V (or open)
• Low = -0.6V – 0.9V @ 1mA
Voltage output +5VDC ±5%
Current output 100 mA nominal, 250 mA max.
Cable length 25 ft.
Infrared (IR) Remote
Number of IR sensors 1 (front)
Wavelength of peak sensitivity 950 nm
Modulation (carrier) frequency 36 kHz (nominal)
Encoding method bi-phase
Reception range * 100 ft.
Control
X