Christie CineIPM-2K, User Manual

Page: 34 / 122

OPERATION
3-8 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
IF WITHIN A PRESENTATION:
Press
Func followed by a 2-
digit number to enable a specific color or colors in the
display (see right). For example,
6 4 Func will
display only red and green data,
6 7 Func will
display all color data. Eliminating one or more colors can
help with certain diagnostics and setups, such as when
accurately overlaying one image on top of another from
stacked projectors.
NOTE:
Color enabling can also be implemented from numerous locations within the
menu system.
DEFINING OTHER USES:
Through ASCII messaging on a PC, you can also create
special user functions for keys 1-5 and 7-9. or others. For example,
Func
can be
programmed to trigger RTEs (Real-Time Events) or to display custom menus. Refer
to the separate
Christie Serial Communications publication available at the Christie
website.
Projector
Press
Proj
to access a specific Cine-IPM 2K within a group, or to confirm if the local
Cine-IPM 2K is listening. The number in the “Enter Number” window indicates
which Cine-IPM 2K is currently listening to commands, and will match the
“projector” number that has been defined in the Menu Preferences menu. In this case,
remember that the “projector” number refers to the Cine-IPM 2K rather than any
projector to which it is connected.
The “Projector” checkbox (read-only) shows whether or not the Cine-IPM 2K
physically connected to a keypad is listening to commands from that keypad. A
checkmark means that connected
Cine-IPM 2K is listening; if there is no checkmark,
you are communicating with a different Cine-IPM 2K .
To control a specific Cine-IPM 2K with the keypad, enter the 3-digit number
assigned to the Cine-IPM 2K you want to use. If you switch to a Cine-IPM 2K other
than the one you are currently using, the checkmark will disappear.
To broadcast to multiple Cine-IPM 2K s, press
Proj
and then
Proj
again
without
entering a projector number. Keypad commands will then affect all Cine-IPM 2K s
present. Note that there is no method of controlling a group of Cine-IPM 2K s within
the same wired configuration using the wired keypad exclusively, since there is only
one wired protocol available in this type of keypad.
NOTE:
The "Broadcast Keys" option in the Communications menu must be selected for
only one (any) Cine-IPM 2K in a serial network. The keypad in use must be OFF
(disabled) for the remaining Cine-IPM 2Ks. See also 2.7, Converting the Keypad and
3.6, Adjusting System Parameters and Advanced Controls.
Enter
Press (or
Enter
on the standard remote keypad) to select a highlighted item, to
toggle a checkbox, or to accept a parameter adjustment and return to the previous
menu or image.
Exit
Press
Exit
to return to the previous level, such as the previous menu.
Proj
Exit