Christie CineIPM-2K, User Manual

Page: 78 / 122

OPERATION
3-52 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
Figure 3.29. Copy X/Y Values into All Projectors
6. In each projector, judge by eye and adjust x/y coordinates slightly in the following
manner:
‰
To match reds, decrease
“Red X” until full field
red screens match.
‰
To match greens, decrease
“Green Y” until full field
green screens match.
‰
To match blues, increase
both “Blue X” and “Blue
Y” until full field blue
screens match.
NOTE: For speed, enable the
“Auto Color Enable” checkbox.
Each color coordinate you select will then automatically trigger a full field display
of the corresponding color.
These coordinate adjustments move the three color points closer together (refer back
to the chromaticity chart shown in Figure 3.20) to establish a “shared” gamut
attainable by all projectors in your group. Adjust only as necessary to ensure that the
resulting color palette is as large as possible. When done, you may need to adjust
lamp power slightly.
7. All screens should now be color-matched. Apply this new “User” gamut to a Cine-
IPM 2K source at any time by selecting it in the “Select Color Adjustment” list
accessed in the Advanced Image Settings menu.