Christie CineIPM-2K, User Manual

Page: 8 / 122

INSTALLATION AND SETUP
2-2 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
2.2). Alternatively, move the ears to their rear mounting location to position
the
Cine-IPM 2K so that its front panel remains accessible and flush with the
rear of the CP2000 pedestal. Always use 4 screws to mount the ears.
2.
INSTALL THE Cine-IPM 2K :
Insert the rear
of the Cine-IPM 2K into the open area of
the pedestal. Use 2-4 screws to secure
each mounting ear to the pedestal frame.
3. Re-install the 2 rack protector posts.
Connect Sources
Connect your desired sources to the appropriate connectors on the front input panel
of the
Cine-IPM 2K . For more information, see 2.2, Connecting Sources .
•
INPUT 1
– RGB input or Extra Video * via BNC connectors
•
INPUT 2
– Digital or analog signals (DVI-I) from a computer
•
INPUT 3
– Composite video
•
INPUT 4
– S-video
•
INPUT 5
– optional input module #1
•
INPUT 6
– optional input module #2
*NOTE:
Extra video is only available with models that have a BNC
connector at
INPUT 3
and will not work with previous Christie models, which
include a RCA
connector at that input.
In a recessed installation, pass
the source cable ends through
the ears and down to exit via the
front toe of the pedestal, then
connect at the source (Figure
2.3).
See the CP2000 User’s Manual
for further cable routing details.
Step 3
X
Figure 2.3. Suggested Cable Routing