Christie CineIPM-2K, User Manual

Page: 74 / 122

OPERATION
3-48 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
NOTE:
Fade Time is not currently supported for 2048 x 1080 or 1920 x 1080
outputs.
Numbers Select Main
Image
Use Numbers Select Main Image
to use the numeric keys #1-8 as
input keys. This remapping of
the keypad (see right) can be
particularly useful with PIP
displays, providing a convenient
shortcut for changing the
primary (background) image
without first having to return to
the
Main menu. To use the keys
in this manner all of the time,
even with single
Cine-IPM 2K
displays, select Always . For
normal keypad function, select
Never (default). Set to “ When
PIP Active” to activate number
keys as input keys only when
PIP is in use.
NOTE: Numbers Select Main
Image keypad functionality works only when menus are closed
Refer to the Cine-IPM 2K’s read-only Status menu to determine what versions of
hardware and software are installed in the Cine-IPM 2K , and what its serial number
is. The Status menu also identifies the current channel, its input location, frequencies
and other details. If your Cine-IPM 2K is connected via RS232 “B” to the CP2000
projector, the TPC Status page also provides similar Cine-IPM 2K status information.
Scroll the full Status menu using . Use for page up/down.
NOTE:
In all cases, the Cine-IPM 2K’s RS232 “B” port must be connected to the
CP2000.
USING THE TPC ONLY
: If your Cine-IPM 2K is connected to the CP2000 via
DVI-1
you can use the TPC for a quick single-step switch to a specific Cine-IPM 2K non-
cinema input #1-6. This source must first be configured for TPC use in the Custom
menu of the TPC as described in 2.5, Setting Up the TPC for Source Selection —then
select this button at the TPC Main menu. Use
Auto
Setup
and/or
Menu on the keypad to
refine Cine-IPM 2K display settings as desired.
Figure 3.26. Keypad Remap
3.8 Status Menu
3.9 Cine-IPM 2K
Source
Selection via
TPC
Controller
Tou
ch Panel