Christie CineIPM-2K, User Manual

Page: 42 / 122

OPERATION
3-16 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
Table 3.2. Abbreviations for Signal Type
Abbrev. Signal Type
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
5W Separate
H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite
Video
Dig Digital
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
To copy, delete or edit a channel,
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press
Func
if you want to copy the selected channel or delete this or other
channels. See Copying or Deleting a Channel below.
•
Press
Enter
if you want to edit channel setups (i.e., non-image related
parameters) for the selected channel. See Editing a Channel Setup ,
below.
TO COPY A CHANNEL
, highlight the desired channel in the Channel Setup menu, then
press
Func
to go to the Channel Copy/Delete submenu. Select “Copy” and
press
Enter
—a new channel will be created. It is identical to original, which still
remains, but it is identified with the next available number from 01-99. If you change
your mind and do
not want to copy the current channel, press
Exit
to cancel and
return to the previous menu. Copying channels is a quick method for creating
numerous channels, each of which can then be edited and adjusted for a variety of
presentations in the future.
Figure 3.9. Copying A Channel
TO DELETE A CHANNEL
, highlight the desired channel in the Channel Setup menu,
then press
Func
to activate the Channel Copy/Delete submenu. Select “Delete” and
press
Enter
—a confirmation window will appear to make sure that you really want to
delete this channel.
Copying or X
Deleting Channels