Christie CineIPM-2K, User Manual

Page: 44 / 122

OPERATION
3-18 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
message appears indicating that this number is already in use–assign a
different channel number.
2)
You can define up to 50 channels.
•
INPUT:
1-8, corresponding to where on the Cine-IPM 2K ’s input panel the
source is connected.
•
IN MENU:
If checked (default, except for automatically defined channels
with unchanged parameters), this defined channel will then appear in the
list available when
key is pressed. If unchecked, the channel must
be accessed via on the keypad or via the Auto Source function.
NOTE: On-screen display of the channel list is an option that must be set
in the
Menu Preferences menu.
•
AUTO SOURCE:
If checked, (default), the Cine-IPM 2K can automatically
locate this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only when it is
directly selected via
on the keypad—and a change in input signal
will not result in a channel change.
•
LOCKED:
If checked, all of the image settings for this channel are disabled.
If unchecked (default), all available image settings can be adjusted as
desired. You cannot use Auto Setup with a locked channel.
•
PREVIOUS CHANNEL:
Select this option to see or change Channel Edit
settings for the previous channel in the Channel Setup list.
•
NEXT CHANNEL:
Select this option to see or change Channel Edit settings
for the next channel in the Channel Setup list.
The most commonly used options for non-cinema image adjustments are accessed
through two
Cine-IPM 2K menus: Size and Position (
Menu
) and Image Settings
(
Menu
) , both of which appear in the Main menu. From either of these two menus,
you can change settings affecting the image from the current channel by working
with the appropriate slidebars, checkboxes and pull-down lists.
Exit will return to the
previous menu (or to the presentation, if from the Main menu) and accept any
changes you may have entered. Settings are saved with the current channel.
From your presentation, you can access any of the individual options in these menus
by pressing
Menu
followed by the appropriate two-digit number representing their
location in the menu system. For example, press
Menu
3 2
to quickly access the
“Gamma” option in the Image Settings menu.
Note that for certain options, you may prefer to use a “direct key” from presentation
level to go directly to a particular option without traveling through the menu system
(
note: available for certain display parameters only ). For example, press
Contrast
to
access the “contrast” slidebar immediately. Press
Exit
to return to your presentation.
NOTES: 1)
To hide these “direct” slidebars, disable the” Display Slidebars”
checkbox in the Menu Preferences menu.
2)
To hide the entire menu system from
view, toggle the on-screen display by pressing the
OSD
key.
Use Auto Setup (
Auto
Setup
)
For a good and efficient first step in perfecting your non-cinema images, press
Auto
Setup
.
This initiates an automated process in which the Cine-IPM 2K quickly optimizes
critical display parameters such as size, position, pixel tracking, etc., based on the
type of incoming source data detected. An Auto Setup can save considerable setup
3.5 Adjusting the
Image
Before You Begin
X