Christie CineIPM-2K, User Manual

Page: 59 / 122

OPERATION
Cine-IPM 2K User’s Manual 3-33
020-100164-01 Rev. 1 (01/08)
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the Cine-IPM 2K menus. The change will
take effect immediately.
Reserved
No function.
Output Format
Use this submenu to
control the output data
sent by the
Cine-IPM
2K to your display
device. Choose between
8-bit and 10-bit data
format, and specify the
desired resolution for displays.
NOTE: If you change resolution of your Cine-IPM 2K output, a dialogue box will
appear to remind you that the change will be implemented on the next power-up of
the Cine-IPM 2K . Cycle the power if desired.
Remember that Cine-IPM 2K outputs must connected as shown in Figure 2.12. In
addition, set the corresponding TPC controls for “Data Format” and “Source” to
match both Output Format settings (refer back to Figure 2.20).
NOTES: 1)
v1.1 software may offer limited support for different resolutions in
external devices. 2) 10-bit output improves displays of digital progressive source
data.
3)
Output Format settings apply for all of your Cine-IPM 2K sources.
Auto Power-up
Enter a checkmark to enable the Cine-IPM 2K to automatically power up after losing
power due to a power failure, or due to unplugging the Cine-IPM 2K during
operation. Note that unsaved display adjustments may be lost.
Set Date & Time
Enter/read the current year-month-day and hour-minute-second. Changes here reset
the projector’s real-time clock.
Menu Preferences
— SUBMENU
Use the options in this submenu to
adjust the appearance, content
and/or location of on-screen menus
and messages.
LARGE MENU FONT —
Enter a
checkmark to enlarge menus and
their text. You may have to adjust
“Menu Location” to accommodate
the increased menu area.
System Configuration
X
— GENERAL —