INSTALLATION AND SETUP
Cine-IPM 2K User’s Manual
2-3
020-100164-01 Rev. 1 (01/08)
Connect DVI Output
TO PROJECTOR:
Connect a DVI cable between the
DVI-1
port on the
Cine-IPM 2K
rear panel and the
DVI-1
port on the
CP2000
. See Figure 2.4.
Distance for DVI Output
DVI Cable Required
Up to 3 ft. / 1m
Use DVI cables provided (2)
4 ft. – 16 ft. / 1.25 – 5m
Use a standard DVI cable
Over 16 ft. / 5m
Use a fiber-optic (or similar) cable
— Contact Christie
Figure 2.4. Standard DVI Connection for 8-bit Output on the CP2000
TO 2
nd
DEVICE:
To use an additional display device such as a digital monitor or
second projector, connect the second DVI cable between
DVI-2
on the
Cine-IPM 2K
rear panel and the
extra device (Figure
2.5). Display devices
connected to
DVI-2
must accept DVI, i.e.
they must be digital—
the DVI-VGA adapter
is for
DVI-1
use only.
In addition, the device
must accept the
Cine-
IPM 2K
format
selected.
Step 4
X
Figure 2.5. Adding a 2
nd
Display Device
Summary of Contents for CineIPM-2K
