EM11 User’s Manual
5. Description of Function Codes
117
It displays the frequency inverter's output power in the running state.
Code
Parameter Name
Display Range
U0-06
Output torque
-200.0%~200.0%
It displays the frequency inverter's output torque in the running state.
Code
Parameter Name
Display Range
U0-07
DI state
-0~32767
It displays the present state of DI terminals. After the value is converted into a binary number, each bit
corresponds to a DI. "1" indicates high level signal, and "0" indicates low level signal. The corresponding
relationship between bits and DIx is described in the following table.
Bit0
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Bit7
Bit8
Bit9
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI10
Bit10
Bit11
Bit12
Bit13
Bit10
Bit11
Bit12
Bit13
Bit14
Bit15
VDI1 VDI2
VDI3
VDI4 VDI1 VDI2 VDI3
VDI4
VDI5
Code
Parameter Name
Display Range
U0-08
DO state
0~1023
It indicates the present state of DO terminals. After the value is converted into a binary number, each bit
corresponds to a DO terminal. "1" indicates high level signal, and "0" indicates low level signal. The
corresponding relationship between bits and DOx is described in the following table.
Table 6-15 Corresponding relationship between bits and DOs
Bit0
Bit1
Bit2
Bit3
Bit4
Bit5
DO3
Relay 1
Relay 2
DO1
DO2
VDO1
Bit6
Bit7
Bit8
Bit9
Bit10
Bit11
VDO2 VDO3 VDO4 VDO5
Code
Parameter Name
Display Range
U0-14
Load speed display 0~65535
For more details, see the description of b9-06.
Code
Parameter Name
Display Range
U0-15
PID setting
0~65535
U0-16
PID feedback
0~65535
They display the PID setting value and PID feedback value.
PID setting = PID setting (percentage) ×C0-05
PID feedback = PID feedback (percentage) × C0-05
Code
Parameter Name
Display Range
U0-18
Input pulse frequency 0.00kHz ~100.00 kHz
It displays the high-speed pulse sampled frequency of DI6, in minimum unit of 0.01 kHz.
Code
Parameter Name
Display Range
U0-19
Feedback speed,
unit:0.01Hz
-3000.0Hz~3000.0 Hz
-300.00Hz~300.00 Hz
It displays the actual output frequency of the frequency inverter.
5. Description of Function Codes
EM11 User’s Manual
118
If b0-11 (frequency command resolution) is set to 1, the display range is -3000.00~3000.00 Hz.
If b0-11 (frequency command resolution) is set to 2, the display range is -300.00Hz~300.00 Hz.
Code
Parameter Name
Display Range
U0-20
Remaining running
time
0.0min~6500.0 min
It displays the remaining running time when the timing operation is enabled. For details on timing
operation, refer to b2-28 ~ b2-30.
Code
Parameter Name
Display Range
U0-21
AI1 voltage before
correction
0.00V~10.57 V
U0-22
AI2 voltage before
correction
0.00V~10.57 V
U0-23
AI3 voltage before
correction
-10.57V~10.57 V
They display the AI sampling voltage actual value. The actually used voltage is obtained after linear
correction, which will reduce the deviation between the sampled voltage and the actual input voltage.
For actual corrected voltage, see U0-09, U0-10 and U0-11. Refer to group b8 for the correction mode.
Code
Parameter Name
Display Range
U0-24
Linear speed
0.0min~65535m/min
It displays the linear speed of the DI6 high-speed pulse sampling. The unit is meter per minute (meter/min).
The linear speed is calculated according to the actual number of pulses sampled per minute and C3-07
(Number of pulses per meter).
Code
Parameter Name
Display Range
U0-27
Communication
setting value
-100.00%~100.00%
It displays the data written in by means of the communication address 0x1000.
Code
Parameter Name
Display Range
U0-28
Encoder feedback
speed
-300.00Hz~300.00 Hz
-3000.0Hz~3000.0 Hz
It displays the motor running frequency measured by the encoder.
If b0-11 (frequency command resolution) is 1, the display range is -3000.0Hz~3000.0 Hz.
If b0-11 (frequency command resolution) is 2, the display range is -300.00Hz~300.00 Hz.
Code
Parameter Name
Display Range
U0-29
Main frequency X
0.00Hz~300.00 Hz
0.0Hz~3000.0 Hz
It displays the setting of main frequency X.
If b0-11 (frequency command resolution) is 1, the display range is -3000.0Hz~3000.0 Hz.
If b0-11 (frequency command resolution) is 2, the display range is -300.00Hz~300.00 Hz.
