Captaris Captaris FaxPress, Supplementary Manual

Page: 505 / 532

Admin Guide > Compliance
493
Compliance
Agency Compliance
This appendix contains important notices about the FaxPress FCC and Telephone Company
compliance, Ringer Equivalency Number, Industry Canada information, as well as safety
warning messages and considerations.
FCC Part 15 Warning
The FaxPress USA units generate, use, and can radiate radio frequency energy and, if not
installed and used in accordance with this manual, may cause interference to radio
communications. These models have been type tested and found to comply with the limits
for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user, at his own expense, will be required to take
whatever measures may be required to correct the interference.
FCC Part 68 Information
The FaxPress USA complies with Part 68 of the FCC Rules. An FCC Part 68 label is located
on each of the FaxPress modem boards. Captaris FaxPress products comply with Part 68
of the FCC Rules.
The FaxPress contains an analog fax board. The Part 68 label on the analog fax board
contains the FCC Registration Number (EBZUSA-34731-FB-E) and the Ringer Equivalence
Number (0.77).
The Ringer Equivalence Number (REN) is useful in determining the quantity of devices you
may connect to your telephone line and still have all of those devices ring when your
telephone number is called. In most, but not all areas, the sum of the RENs of all devices
connected to one line should not exceed five (5.0). To be certain of the number of devices
you may connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area.
Connection of a FaxPress USA unit to the telephone network should be made by using
standard modular telephone jacks, type RJ11. The plug and/or jacks used must comply
with FCC Part 68 rules.
Japan Telecommunication Compliance
The FaxPress Japan models contains Intel Analog fax board(s) for Japan. The Intel Analog
fax board for Japan complies with the Japanese telecommunication J.A.T.E. standard with
the approval number A01-0936JP.
Rights of the Telephone Company
If this telephone equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC.