Cantel Medical MEDIVATORS DSD EDGE, Service Manual

Page: 57 / 152

57
Function 0–Close All Valves and Turn All Pumps Off
This function closes all valves and turns all pumps OFF. This function also cancels Function 18. Always use Function 0 before exiting
the Diagnostics Function menu.
Note: To select multiple components, activate Function 18, then choose the
components.
Note: Before exiting the Diagnostics Menu, always choose Function 0 to deactivate all
devices, then choose Function 14 on Station B to open the water valve.
Function 1–Activate Detergent Valve
This function activates the detergent valve for the selected station.
Function 2– Activate Water Valve
This function activates the water valve on the main manifold for the selected station.
Function 3–Activate Alcohol Pump
This function activates the alcohol pump for the selected station.
Caution! Do not activate the alcohol pump unless the alcohol valve is open. Perform
Functions 18, 12, 3 to activate.
Function 4–Activate Air System
This function activates the air system (compressor and air valve) for the selected station.
Caution! Ensure the scope hookup is connected in the basin before performing this
procedure.
Function 5–Activate Air Valve
This function activates the air valve for the selected station.
Function 6–Activate Chamber Valve
This function activates the chamber valve for the selected station.
Function 7–Activate Disinfectant Pump
This function activates the disinfectant pump and valves 8 and 9 for the selected station.
Caution! Ensure the scope hookup is connected in the basin before performing this
procedure.
Function 8–Activate Disinfectant Supply Valve
This function activates the disinfectant supply valve for the selected station.
!
!
!