Cantel Medical MEDIVATORS DSD EDGE, Service Manual

Page: 5 / 152

5
Using this Manual
This manual is for the MEDIVATORS
®
DSD EDGE
®
endoscope reprocessor. The manual describes the features of the
reprocessor, how to setup and operate the reprocessor, and maintenance and troubleshooting procedures to keep the
reprocessor in good operating order.
Throughout the manual are notes, service notes, cautions, and warnings. These provide additional important information.
An example of each is illustrated below.
Indications for Use
MEDIVATORS DSD EDGE Endoscope Reprocessing System tests, washes, disinfects and rinses flexible endoscopes, such
as fiberoptic and video endoscopes between patient uses. The DSD EDGE Endoscope Reprocessing System is indicated to
provide high level disinfection, using RAPICIDE
®
PA High Level Disinfectant, of heat sensitive semi-critical endoscopes.
Manual cleaning of endoscopes is required prior to placement in the DSD EDGE Endoscope Reprocessor system.
RAPICIDE PA contact conditions in the DSD EDGE Endoscope Reprocessor : 5 minutes - 30°C - 850 ppm peracetic acid
Note: A note refers to relevant information not covered in the main body of the text.
Service: A service note refers to operations or repairs only a trained service technician may
perform.
Caution! A caution describes actions and conditions that may cause damage to or
destruction of the equipment.
Warning! A warning describes actions and conditions that may cause severe personal
injury or death to the operator or patient.
!
Chapter 1
INTRODUCTION