Cantel Medical MEDIVATORS DSD EDGE, Service Manual

Page: 55 / 152

55
Introduction
Use the diagnostics functions to verify proper component operation when troubleshooting the reprocessor,
to reset the reprocessor to default settings, to enable or disable sensors, to upgrade software, and to set up
the reprocessor options.
Precautions
Always refer to the Safety section in the Introduction chapter before attempting to service the reprocessor.
Verify a scope hookup is connected in the basin and the floating lid in place before operating the
reprocessor. Always activate Function 0 before exiting the Diagnostics Functions menu.
Note: Refer to the flow diagram for proper component identification when using the
diagnostics functions for troubleshooting.
Note: Use the STATION SELECT button to select stations while in the Diagnostics Menu.
Warning! Endoscope reprocessing may be compromised while preforming
Diagnostics functions during a disinfectant cycle.
Chapter 4
DIAGNOSTICS MENU