38
Programming the Reprocessor
INPUT PROGRAM
Custom programs allow the operator to change the cycle parameter settings, or to setup custom reprocessing
protocols. A maximum of nine custom programs can be pre-set. Refer to the disinfection cycle chart in the appendix
for range settings.
Note: Depending on selections, some of the following screens will
not be displayed.
Note: To deactivate a cycle, enter “0” for the time setting, then press
the ENTER button.
1. Press the SETUP button.
•
Enter 5 on the keypad, then press the ENTER button.
2. The “Program 1” screen is displayed. Enter the program digit (1-9) on the numeric keypad, then press the
ENTER button.
3. The “Flush” screen is displayed. Enter the desired detergent flush time.
•
Enter two digits for the minutes, then press ENTER.
•
Enter two digits for the seconds, then press ENTER.
4. The “Soak” screen is displayed. Enter the desired soak time.
•
Enter two digits for the minutes, then press ENTER.
•
Enter two digits for the seconds, then press ENTER.
5. The “Soak Rinse” screen is displayed. Enter the desired soak rinse time.
•
Enter two digits for the minutes, then press ENTER.
•
Enter two digits for the seconds, then press ENTER.
Summary of Contents for MEDIVATORS DSD EDGE
