Canon LX-P1300 User Manual Download Page 85

Page: 85 / 210

Setting Cutter

Complete the setting procedure.

Click [OK] in the printer driver setup window.
The specified cutting interval takes effect.

■

Adjusting the Cutting Position

The cutting position can be adjusted between the adjacent printed labels.

IMPORTANT

• Administrative privileges over this printer are required to configure printer settings.

If a user without administrative privileges proceeds with configuration of settings, a message ”You do not have
rights to printer management. Please contact your system administrator.” appears.
For more details, see

“Administrative privileges required for certain features (P.40)”

Open the Properties window of the printer driver.

(P.30)

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands