Canon LX-P1300, User Manual

Page: 173 / 210

167
List of Error Messages/Warning Messages
Error Message Error Content Handling
Paper jam #****
Paper is jammed. Remove the paper jam and load the
paper again.
(P.12)
If out of paper, resupply with new
paper.
(P.12)
To cancel printing, click on [Cancel
Print Job] in the Status Monitor.
If the same error occurs, confirm the
following:
- Confirm that the thickness of the
set paper is 145μm-255μm.
- Confirm that the paper set (size
and shape) matches the paper
(size and shape) configured by
the application software or printer
driver.
- There is a possibility that the
transport unit's sensor is dirty.
Clean the transport unit.
(P.144)
Paper set error #****
There is either no paper or paper is
jammed. If out of paper, resupply with new
paper.
(P.12)
To cancel printing, click on [Cancel
Print Job] in the Status Monitor.
If the paper is jammed, remove the
paper jam and load the paper again.
(P.12)
Update error #****
The firmware update failed. Perform the update again.
Data mismatch #****
Abnormal data was received from
the computer. Confirm the cable connection and
print again.
Memory full
Insufficient memory due to the
overlay printing's form data being
large. Click on [Cancel Print Job] in the
Status Monitor, and cancel printing
and recreate the form data.