Canon LX-P1300 User Manual Download Page 120

Page: 120 / 210

114

Chapter 3 Maintenance

Checking the Status of the Maintenance Cartridge

The maintenance cartridge information will be indicated on the status monitor and by the maintenance cartridge
lamp.

Indication by
maintenance

cartridge lamp

Display on status monitor

Status

Lit

• The maintenance cartridge is full and

must be replaced.

Blink

• The maintenance cartridge has limited

free space.
Free space: About 10%
(It is recommended to have a new
maintenance cartridge ready.)

Off

• The maintenance cartridge has free

space.

IMPORTANT

• For details on how to purchase a new maintenance cartridge, contact your place of purchase.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands