Canon LX-P1300 User Manual Download Page 182

Page: 182 / 210

176

Chapter 5 Appendix

3. Click [Yes].

Ink bleeding starts.
Do not operate the printer until after the
message indicating that the removal of ink is
completed appears.

IMPORTANT

• During execution of [Moving The Printer], observe the following precautions:

Do not turn the printer off.

Do not open/close the ink tank cover and transport unit lever.

Do not operate any other component of the printer.

NOTE

• If the message “Maintenance cartridge full” appears, replace the maintenance cartridge with a new one, and then

click [Retry]. For how to replace the maintenance cartridge, see

“Replacing the Maintenance Cartridge (P.108)”

Check that the execution of [Moving The Printer] has been completed.

1. Click [OK].

Turn the printer off.

(P.7)

IMPORTANT

• Do not remove the power plug from the outlet when the power lamp is lit or blinking. A printer failure could

result.

Disconnect the power cord and interface cable.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands