Canon LX-P1300 User Manual Download Page 174

Page: 174 / 210

168

Chapter 4 Troubleshooting

Error Message

Error Content

Handling

Overlay data error

Error with overlay printing data.

Check the cable connection and
retry printing.

Print head position error #****

Problem with either the transport
unit or print head.

Remove the transport unit and
confirm that no foreign matter is on
the insides.

Open the ink tank cover and
confirm there is no foreign matter
around the print head.

Transport unit error #****

There are problems with transport
unit internals.

Remove the transport unit and
confirm that no foreign matter is on
the inside.

Connected to a model other than
Canon LX-P1300 ( or LX-D1300)

It is connected to a printer other
than this printer.

Connect with this printer.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands