Canon LX-P1300 User Manual Download Page 13

Page: 13 / 210

Turning the Printer On/Off

How to Turn the Printer Off

Make sure the printer is not operating.

When the status lamp is blinking (green), the printer is operating. Make sure the status lamp lights up (green)
before turning the printer off.

Press and hold the power key until the status lamp goes out.

When the power lamp stops blinking, the
printer is turned off.

When the status lamp is off, press and hold
the power key for at least 1 second.

IMPORTANT

• After powering the printer down, make sure the power lamp is off prior to unplugging the power cord.

• If the printer will not be used for a long period of time, disconnect the power cord, AC adapter, and interface

cable.

NOTE

• About the Off Timer

(P.10)

After switching to sleep mode, if the printer is not in use for 240 minutes (4 hours), the printer will automatically
turn off.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands