Canon LX-P1300 User Manual Download Page 11

Page: 11 / 210

Names and Functions of Components

Operation Panel

Power Key/Lamp

Press this key to turn on/off the printer. This lamp lights
up or blinks depending on the power supply status.

On: The printer is powered on.
Blink: The printer is in sleep mode (power-saving mode).
Off: The printer is powered off.

Status Lamp

This lamp lights up or blinks green or orange.

Lit (green): Printing from the computer is possible

(online mode).

Blink (green): The printer is processing or operating

(printing, cleaning, etc.)

Lit (orange): An operator call error has occurred.

Blink (orange): A service call error has occurred.

Off: Instructions and print data cannot be received

from the computer (offline mode).

Ink Lamps (Bk/C/M/Y)

Each lamp lights up or blinks when there is no ink
available for printing or the ink tank is low.

Lit: There is no ink available for printing or the ink tank

is faulty.

Blink: The ink tank is low.
Off: The ink tank is full.

Maintenance Cartridge Lamp

This lamp lights up or blinks when there remains little
or no maintenance cartridge space to collect ink.

Lit: The maintenance cartridge is full or faulty.
Blink: The maintenance cartridge is running out of

space.

Off: The maintenance cartridge has free space.

Pause Key

Press this key to switch between online and offline
modes.
When printing is in progress, pressing this key stops
printing temporarily. Pressing this key again resumes
printing.

NOTE

• When the printer is in the sleep mode, the Status lamp, Ink Lamps, and Maintenance Cartridge Lamp stay off

regardless of the status of the printer, ink tanks, and maintenance cartridge.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands