Canon LX-P1300 User Manual Download Page 185

Page: 185 / 210

179

Moving the Printer

3. Click [Yes].

Execute [Shipping The Printer].
Do not operate the printer before the specified

message appears in step

IMPORTANT

• During execution of [Shipping The Printer], observe the following precautions:

Do not turn the printer off.

Do not open/close the ink tank cover and transport unit lever.

Do not operate any other component of the printer.

NOTE

• If the message “Maintenance cartridge full” appears, replace the maintenance cartridge with a new one, and then

click [Retry]. For how to replace the maintenance cartridge, see

“Replacing the Maintenance Cartridge (P.108)”

When the following message appears, remove ink tanks.

1. Open the ink tank cover.

2. Remove all ink tanks.

3. Close the ink tank cover.

Closing the ink tank cover will start [Shipping
the Printer] procedure.
Do not operate the printer before the specified

message appears in step

IMPORTANT

• During execution of [Shipping The Printer], observe the following precautions:

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands