Canon LX-P1300 User Manual Download Page 112

Page: 112 / 210

106

Chapter 3 Maintenance

Install the ink tank in the printer.

1. Insert the ink tank in the slot in the printer

with the ink supply opening down.

Before installing each ink tank, match the ink
color with the corresponding label.

2. Press on the top of the ink tank until the

ink tank clicks into place.

IMPORTANT

• Install the ink tank at the correct position according to the label.

If any ink tank is installed in the wrong position, the printer cannot print. In addition, ink colors could be mixed,
resulting in a printing failure.

• If any one of the ink tanks is not installed, the printer cannot print. Be sure to install all ink tanks.

• Once you installed an ink tank, do not remove or reinstall it before the replacement timing or ink refreshing

timing is reached.

Close the ink tank cover.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands