81
Setting Cutter
5
5. Click [Yes].
The adjusted cutting position takes effect.
3
Print a test pattern to make sure paper is cut at the center of the gap between labels.
Before making prints, print a test pattern to confirm the cutting position.
NOTE
• Print one of the following test patterns:
-
Head position adjustment pattern
-
Setting values
Operating the Manual Cut
Paper can be cut manually when you do not use the auto cutter feature (the [Auto Cutter] check box is not
selected) or you have stopped printing temporarily.
IMPORTANT
• When printing is in progress, you cannot cut paper manually.
• When an error has occurred, you may not be able to cut paper depending on the type of the error.
• Do not pull the printed paper through the ejection slot. It could cause a printing failure
• When paper has stopped in a state where a label is located at the cutting position, you cannot cut paper
manually.
