Canon LBP253 Series User Manual Download Page 398

Page: 398 / 523

When an Error Code Appears

0U6X-0H9

If printing is not successful due to an error, the print log screen displays an error code consisting of three digits. Check

the following to find out causes and solutions for each error code.

#037

Memory is full.

●

If a print job is queued, wait until the job is completed and try printing again.

●

To print a document with many pages, divide it into multiple sections.

#099

Printing was canceled.

●

When you cancel an operation, this error code is displayed, but this is not abnormal. Try printing
documents again as necessary.

#701

Authentication failed because an incorrect Department ID or PIN was entered when the Department ID

Management was activated.

●

Enter the correct Department ID and PIN.

Continuing operating without entering a Department ID was attempted even though unknown-ID jobs

(functions that permit operations without a Department ID and PIN) were disabled in the Department ID

Management.

●

Enable unknown-ID jobs in System Manager Mode in Remote UI.

Blocking Jobs When Department ID Is Unknown(P. 233)

#822

An image file in a USB memory device could not be printed because the format of the image file is not

supported.

●

Check the supported file formats and save the file again.

Printing from USB Memory (USB Print)(P. 126)

Troubleshooting

392

Summary of Contents for LBP253 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP253 Series

Reviews:

Related manuals for LBP253 Series

Brands by name

Popular brands

Canon LBP253 Series, User Manual

Search results

Summary of Contents for LBP253 Series

Reviews:

Related manuals for LBP253 Series

Brands by name

Popular brands