Canon iR C1020 Series, Service Manual

Page: 71 / 408

Chapter 2
2-11
F-2-29
5) Install the 3 wire saddles [1] and secure the route cord part [2] of the hand
set with the 3 wire saddles [1].
F-2-30
6) Connect the terminal [1] of the cord to the modular terminal " "[2]of the
host machine.
F-2-31
7) Turn on the main power switch.
8) Check that you can hear the dial tone through the handset.
2.7 Installing the Memory
2.7.1 Checking the Contents
0019-6871
<System Upgrade RAM-A1>
F-2-32
2.7.2 Checking Before Memory Expansion
0020-1946
1) Enter service mode and output the spec report.
COPIER > FUNCTION > MISC-P > OUTPUT > SPEC
2) Check the memory capacity before installing the extension RAM with
'TOTAL MEMORY' of the spec report.
3) Exit service mode.
2.7.3 Turning OFF the Power of the Host Machine
0019-6883
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.
2.7.4 Installation Procedure
0019-6885
1) Remove the cover plate [1] at the rear cover.
- 1 claw [2]
[1]
[1] [2] [1]
[1] Expansion memory 1pc.
[1] [2]
[1]