Canon iPR C7010VP Series, Installation Manual

Page: 80 / 157

Chapter 2
2-35
- 1 claw [2]
F-2-138
2) Remove the lower feed roller 4 [1].
- Front side
- 1 screw [2]
- 1 bushing (w/leaf spring) [3]
- 1 E-ring [4]
- 1 bearing [5]
- Rear side
- 1 E-ring [6]
- 1 bearing [7]
- 1 belt [8]
F-2-139
3-3. Removing the right deck merge roller
1) Remove the 2 connectors [1], and secure each of the harness to the respec-
tive 2 edge saddles [2].
F-2-140
2) Remove the turn assembly [1].
- Front side
- 1 spring [2]
- 1 screw [3]
- 1 shaft pin [4]
- Rear side
- 1 screw [5]
- 1 shaft pin [6]
F-2-141
3) Remove the inner guide face cap cover [1].
- 2 screws [2]
- 3 claws [3]
F-2-142
[1] [2]
[5]
[4]
[7]
[6]
[3]
[2]
[1]
[8]
[2]
[1]
CAUTION:
Do not loose washers [7] located at both edges of the turn assembly.
CAUTION:Point to Note When Attaching
Be sure to make the cams [1] at the both sides of the turn assembly slide on
the open/close cam [2] to attach the unit.
[2]
[3]
[5]
[6]
[4]
[1]
[7] [7]
[2] [1]
[2]
[1]
[3] [1]
[2]