Canon iPR C7010VP Series, Installation Manual

Page: 81 / 157

Chapter 2
2-36
4) Remove the belt [1].
F-2-143
5) Remove the right deck merge roller [1].
- Front side
- 1 screw [2]
- 1 bushing (w/leaf spring) [3]
- 1 E-ring [4]
- 1 bearing [5]
- Rear side
- 1 E-ring [6]
- 1 pully [7]
- 1 parallel pin [8]
- 1 E-ring [9]
- 1 bearing [10]
F-2-144
3-4. Removing the external merge roller
1) Detach the face cap cover [1].
- 3 screws [2]
- 3 claws [3]
F-2-145
2) Remove the external merge roller [1].
- Front side
- 1 screw [2]
- 1 bushing (w/leaf spring) [3]
- 1 E-ring [4]
- 1 bearing [5]
- Rear side
- 1 E-ring [6]
- 1 bearing [7]
- 1 belt [8]
F-2-146
3) Remove the following parts from the external merge roller.
- 1 E-ring [2]
- 1 pully [3]
- 1 parallel pin [4]
F-2-147
2.1.6 Upper Feed Unit
2.1.6.1 Feed Unit (Upper) (14 million prints)
0026-4805
imagePRESS C6010 / imagePRE SS C7010VP / imagePRE SS C6010VP /
imagePRESS C7010VP FS / image PRESS C7010VP PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
1. Parts to replace
- Transparency sensor (RH7-7129)
2. Before the replacement
1) Pull out the Feed Assembly toward the front.
3. Replacement procedure
1) Open the front right cover [1] and the front left cover [2] of the main sta-
tion.
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[1]
[1]
[5]
[4]
[2]
[3]
[6]
[7]
[8]
[9]
[10]
[3]
[1]
[2]
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[1]
[8]
[5]
[4]
[2]
[3]
[7]
[6]
[1]
[2]
[3]
[4]