Canon iPR C7010VP Series, Installation Manual

Page: 130 / 157

Chapter 2
2-85
F-2-357
9) Remove the delivery flapper spring [1].
- Front side
- 1 E ring [2]
- 1 bushing [3]
- Rear side
- 1 E ring [4]
- 1 bushing [5]
- 1 flapper [6]
F-2-358
2.1.10.2 Reverse Guide Unit (Lower) (14 million prints)
0026-4607
imagePRESS C6010 / imagePRESS C7010VP / imag ePRESS C6010VP /
imagePRESS C7010VP FS / imageP RESS C7010VP PSU / imagePRESS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
1. Parts to replace
- Color sensor (FM2-2713)
2. Replacement procedure
1) Open the sub station front right cover and the front left cover.
F-2-359
2) Push the 2 hinge release buttons (upper and lower) [1] and move the 2
hinges [2] in the direction of [A].
3) Remove the 2 hinges [2] by moving them in the direction of the arrow [B],
and remove the Sub Station Left Front Cover [3].
F-2-360
4) Release the lever (C-D3) [1] and pull out the reverse/outer delivery unit
[2].
F-2-361
5) Remove the inner cover [1].
- 2 screws [2]
F-2-362
[2]
[1]
CAUTION:
When releasing the 2 hinges of the Sub Station Front Left Cover, the hinges
may be deformed. Be sure to hold the Sub Station Front Left Cover to keep
it horizontal and release the lower hinge first.
[1] [2]
[A]
[B]
[1]
[2]
[3]
[1]
[2]
[1]
[2]