Canon iPR C7010VP Series, Installation Manual

Page: 143 / 157

Chapter 2
2-98
9) Tu rn the lower vertical path un it upside do wn and r emove the senso r
mount [1].
- 1 screw [2]
F-2-408
10) Remove the 2 bearings [1] on the rear side.
- 1 E ring each [2]
- 1 pulley each [3]
- 1 dowel pin each [4]
F-2-409
11) Remove the 2 bearings on the front side, and then remove the lower ver-
tical path rollers 1 [2] and 2 [3].
- 1 screw each [4]
- 1 grounding plate each [5]
- 1 sintered bushing each [6]
- 1 E ring each [7]
F-2-410
2.2.9 Upper Deck Pull-Out Roller Unit
2.2.9.1 Upper Deck Pull-out Roller Unit
0026-5013
imagePRESS C6010 / imagePRE SS C7010VP / imagePRE SS C6010VP /
imagePRESS C7010VP FS / image PRESS C7010VP PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
[2]
[1]
[1] [2]
[1]
[4]
[3]
[2]
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
CAUTION: Point to note when attaching
- Do not touch the 4 rubber rollers with bare hand.
- Attach each roller with the slot [2] facing to the front side.
[2]
[3]
[1]
[7]
[6]
[5]
[4]
[1]
[1]
[2]
[2]