Canon iPR C7010VP Series, Installation Manual

Page: 71 / 157

Chapter 2
2-26
F-2-103
6) Disconnect the developing waste toner connecting pipe [1] and the drum
waste toner connecting pipe [2]. (1 each for each color)
- 8 screws [3]
F-2-104
7) Detach the fan unit [1].
- 3 connectors [2]
- 2 screws [3]
F-2-105
8) Push the [A] area of the w aste toner feed connecting window [1] at the
back of the sub station and disengage the 2 claws [2] in the direction of
the arrow to remove the waste toner feed connecting window [1].
F-2-106
9) Move the waste toner feed pipe [1] fully in the direction of the arrow.
F-2-107
CAUTION: Points to Note At Installation
Be sure to fit the developing waste toner connecting pipe [1] and the drum
waste toner connecting pipe [2] in the opening [3] of the waste toner pipe,
and then fix them with the screw [4] while pressing from upward. (Be sure
to fit the drum waste toner connecting pipe [2] surely into the boss [5].)
[1] [2] [3] [3]
[1]
[4]
[2]
[4]
[3] [5]
CAUTION: Points to note when attaching
1) Pull out the waste toner delivery pope [1] at the main station side. When
putting it into the waste toner connecting mouth, be sure that the gear [3] at
the main station side and the gear [4] are fit at the following position.
[1]
[2]
[2] [2]
[3]
[1]
[2]
[2]
[A]
[1]