Canon iPR C7010VP Series, Installation Manual

Page: 54 / 157

Chapter 2
2-9
7) Remove the Sub Hopper Motor Unit [1].
- 2 Screws [2]
- 2 Edge Saddles [3]
- 2 Wire Saddles [4]
- 1 Connector [5]
F-2-33
8) Remove the Process Unit Stay [1].
- 3 Screws [2]
- 13 Connectors [3]
- 1 Wire Saddle [4]
F-2-34
9) Remove the Developing Assembly Rail (Right) [1] by moving it in the di-
rection of the arrow.
- 1 Screw [2]
- 1 Boss [3]
- 2 Protrusions [4]
F-2-35
10) Remove the Developing Lower Duct [1].
- 2 Screws [2]
- 2 Bosses [3]
F-2-36
11) Remove the end of the wire [1] from the hook [2] with tweezers.
F-2-37
12) Free the harness [1] and the Relay Connector [2] from the Harness Guide
[3].
- 2 Wire Saddles [4]
F-2-38
13) Disconnect the 2 connectors [1].
F-2-39