Canon iPR C7010VP Series, Installation Manual

Page: 97 / 157

Chapter 2
2-52
F-2-230
3) Free the harness from the edge saddle [1].
F-2-231
4) Remove the stepped screw [1].
F-2-232
5) Open the duplexing feed unit 2 (lower) of the main station while pressing
the release plate [1].
F-2-233
6) Open the duplexing feed unit 2 (lower) of the main station while pressing
the release plate [1].
F-2-234
7) Turn over the Main Station Duplex Fee d Unit 2, and remove the Guide
Handle Shaft [1].
- 2 screws [2]
- 1 link plate [3]
- 2 bushings [4]
F-2-235
8) Move the lower guide plate [1] in the direction of the arrow and detach it.
- 1 screw [2]
F-2-236
When detaching the duplexing feed roller 1-2
9) Move the duplexing feed roller 1-2 [1] in the direction of the arrow and
detach it.
- 1 E-ring [2]
- 1 pulley [3]
- 1 dowel pin [4]
[1]
[2] [3]
[4] [1]
[1]
[1]
[1] [2]
CAUTION:
Be careful not to lose the bushing [1] not being secured.
[1]
[1]
[1] [2] [2] [3] [4] [4]
[1] [2]