Canon iPR C7010VP Series, Installation Manual

Page: 138 / 157

Chapter 2
2-93
12) Lift the Deck Pickup Unit, and remove the Attraction Duct [1].
- 4 Screws [2]
- 1 Bearing [3]
F-2-391
13) Remove the 4 bearings [1].
- 4 E rings [2]
- 4 washers [3]
F-2-392
14) Remove the 3 pickup feed belts [1].
F-2-393
2.2.5 Middle Deck Pickup Unit
2.2.5.1 Middle Deck Pickup Unit
0026-5009 imagePRESS C6010 / im agePRESS C7010VP / imagePRESS C60 10VP /
imagePRESS C7010VP FS / image PRESS C7010VP PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
F-2-394
T-2-6
CAUTION:
Remove the screws while supporting the suction duct. If not supported, the
suction duct may drop down to be broken.
CAUTION: Point to note when attaching
Fit the bearing [2] of the belt drive roller [1] into the hole [3] of the frame
and fit the 2 bosses [4] of the suction duct to fix.
[1]
[2]
[3]
[4]
[4]
CAUTION:
Move the pickup feed belts carefully not to stretch when attaching/removing
them.
No. Name of part Qty.
[1] Middle deck pickup solenoid (SL701) 1
[2] Middle deck pull-out roller 1
[3] Pickup feed belt 3
[1]
[3]
[2]
[1]
[3]
[2]
[1]
[2]
[3]
[1]
[1]
[3]
[2]