Canon iPR C7010VP Series, Installation Manual

Page: 148 / 157

Chapter 2
2-103
F-2-423
T-2-13
1) Remove the horizontal path unit.
Please r efer to "Removing H orizontal Pa th U nit" in "POD D eck A1
Service Manual."
2) Remove the rail [1] on the right.
- 1 screw [2]
F-2-424
3) Remove the 4 motor mounts [1] and the 4 timing belts [2].
- 1 wire saddle [3]
- 1 connector each [4]
- 2 screws each [5]
F-2-425
4) Remove the 4 bearings [1] on the rear side.
- 1 E ring each [2]
- 1 pulley each [3]
- 1 dowel pin each [4]
F-2-426
No. Name of part Qty.
[1] Horizontal path roller 1 1
[2] Horizontal path roller 2 1
[3] Horizontal path roller 3 1
[4] Horizontal path roller 4 1
[2]
[1]
[3]
[4]
[2] [1]
CAUTION: Point to note when attaching
Attach the timing belts [1] to cover the motor pulleys [2], the pulleys [3] and
the tensioner rollers [4] uniformly.
[1] [1] [2]
[2]
[1] [1] [2] [2]
[3]
[4]
[4] [4] [5] [5]
[5]
[5] [4] [5]
[2]
[1] [3]
[4] [2]
[1] [3]
[2]
[1] [3]
[4] [4] [2]
[1] [3]
[4]
[1]
[2]
[3]
[4]